Avery Weigh-Tronix

Overview

The LS630 weigh-in-motion axle weighers provide a portable weighing solution that dynamically or statically reports axle and gross vehicle weight.

Portable weigh-in-motion allows authorities or fleet operators to quickly monitor, screen vehicle gross or axle loads where a permanent weigher is not available. Consisting of a wireless indicator, two scales and rollup ramps, the system is fully portable in the boot of an estate vehicle and can be set up by 1 or 2 people in under 15 minutes.

Portable axle weighers

Static or in-motion vehicle weighing
Comprises of a wireless indicator, 2x scales with roll-up ramps
Dynamic operating speed of up to 6mph
Up to 200 hours battery life
All-weather indicator case with integrated thermal printer
144mm LCD display
Store up to 1,500 weigh records
Wheel weights, axle weights, gross vehicle weight, axle spacing and vehicle speed can be printed onto a ticket

Technical specification

General	Dynamic Pads	PT20 Indicator
Operating Speed (dynamic mode): 1-6 mph Dynamic Accuracy (GVW): 2-3% at 3 mph Static Accuracy: +/-0.5% of verified gross weight or 1 display graduation, whichever is greater Calibration Interval: 6-12 months IP Rating: IP67 Operating Temperature: -10°C to +40 °C (+14°F to +104°F)	Capacity: 15,000 kg x 20 kg per pad / 30,000 kg Dimensions (weighing area): 380mm x 780mm Dimensions (overall): 405mm x 1025mm Weight: 31 kg Batteries: 4 alkaline ‘AA’ cells Battery Life: 50 hours (typical) Standby Mode: Yes	Controls Keys: 41 control keys Display: 145 mm (5.7”) graphic LCD with backlightPower Batteries: – 6 ‘D’ cell alkaline or NiMH rechargeable cells Battery Life: 40 to 200 hours (dependent on system detail, printer, and back light use) Auto shut off / Low battery alert: Yes Time/Date battery: (1) CR2032 Lithium button cell Outputs Output: USB, RS485/ANALOG, and USB Flash Drive Relay Output: 2 outputs, each with C/NO/NC contacts, 5A @ 250VAC or 30VDC Analog Output: (16-bit): 0-10V, 4-20mA, 0-5V, +/-5V, +/-10V, 0-20mA Data Storage Capacity: Up to 1500 weigh records Data Recall: All stored records can be recalled to view or print Data Export: All records can be exported via USB, RS232, or USB flash drive Environment Casing: Hardened case rated IP67 when closed, IP52 when opened and operational Temperature: Operating -20 C to 60 C (printer 0 C to 50 C) Radio Radio Frequency: ISM 2.4GHz, 802.15.4 DSSS* License Requirements: None. Preapproved US/FCC, CAN/IC, EUR/CE Range: 150’ / 45m line of sight, reduced with obstructions

General

Dynamic Pads

PT20 Indicator

Operating Speed (dynamic mode): 1-6 mph
Dynamic Accuracy (GVW): 2-3% at 3 mph
Static Accuracy: +/-0.5% of verified gross weight or 1 display graduation, whichever is greater
Calibration Interval: 6-12 months
IP Rating: IP67
Operating Temperature: -10°C to +40 °C (+14°F to +104°F)

Capacity: 15,000 kg x 20 kg per pad / 30,000 kg
Dimensions (weighing area): 380mm x 780mm
Dimensions (overall): 405mm x 1025mm
Weight: 31 kg
Batteries: 4 alkaline ‘AA’ cells
Battery Life: 50 hours (typical)
Standby Mode: Yes

Controls
Keys: 41 control keys
Display: 145 mm (5.7”) graphic LCD with backlightPower
Batteries: – 6 ‘D’ cell alkaline or NiMH rechargeable cells
Battery Life: 40 to 200 hours (dependent on system detail, printer, and back light use)
Auto shut off / Low battery alert: Yes
Time/Date battery: (1) CR2032 Lithium button cell

Outputs
Output: USB, RS485/ANALOG, and USB Flash Drive
Relay Output: 2 outputs, each with C/NO/NC contacts, 5A @ 250VAC or 30VDC
Analog Output: (16-bit): 0-10V, 4-20mA, 0-5V, +/-5V, +/-10V, 0-20mA

Data Storage
Capacity: Up to 1500 weigh records
Data Recall: All stored records can be recalled to view or print
Data Export: All records can be exported via USB, RS232, or USB flash drive

Environment
Casing: Hardened case rated IP67 when closed, IP52 when opened and operational
Temperature: Operating -20 C to 60 C (printer 0 C to 50 C)

Radio
Radio Frequency: ISM 2.4GHz, 802.15.4 DSSS*
License Requirements: None. Preapproved US/FCC, CAN/IC, EUR/CE
Range: 150’ / 45m line of sight, reduced with obstructions